|Table of Contents|

Double-solutions effect on preparation of perovskite thin films and photovoltaic performance of related solar cells(PDF)


Research Field:
Publishing date:


Double-solutions effect on preparation of perovskite thin films and photovoltaic performance of related solar cells
Miao Chunqiong1 Lan Huabin2 Fan Ping23 Liang Guangxing23 and Lan Chunfeng23
1) Department of Electric Power Engineering, Guangxi Electrical Polytechnic Institute, Nanning 53000, Guangxi Province, P.R.China
2) College of Physics and Energy, Institute of Thin Film Physics and Applications & Shenzhen Key Laboratory of Sensor Technology, Shenzhen University, Shenzhen 518060, Guangdong Province, P.R.China
3) Key Laboratory of Optoelectronic Devices and Systems of Ministry of Education and Guangdong Province, Shenzhen University, Shenzhen 518060, Guangdong Province, P.R.China
condensed matter physics thin-film solar cells perovskite film double solution method microstructures photovoltaic performance
O 469
CH3NH3PbI3 perovskite films and the perovskite solar cells were prepared via reaction of PbI2 films and CH3NH3I (MAI) solutions of different concentrations under high-humidity ambient conditions.It was found that high concentration MAI solution contributes to the formation of the dense films with nano-scale perovskite grains, while low concentration MAI solution results in rough films with micrometer-scale grains and many voids and openings. None of these films could benefit the high-performance perovskite solar cells from the aspects of grain boundaries and coverage area. In order to overcome the disadvantage of the single solution method,modified double solution method was developed. Eight mg/mL low concentration MAI solution was used to react with PbI2 films for 10 s and then high concentration MAI solutions of 15 and 30 mg/mL were used for post-treatment. Consequently, dense CH3NH3PbI3 perovskite films with large-scale grains with little PbI2 residue were obtained. Accordingly, the perovskite solar cells fabricated in ambient conditions by this method exhibit a good photovoltaic performance.


[1] Green M A, Ho-Baillie A, Snaith H J.The emergence of perovskite solar cells[J].Nature Photonics,2014,8: 506-514.
[2] Zhang Wei,Eperon G E, Snaith H J. Metal halide perovskites for energy applications[J].Nature Energy,2016,1: 16048.
[3] Kojima A, Teshima K, Shirai Y,et al. Organometalhalideperovskites as visible-light sensitizers for photovoltaic cells[J]. Journal of the American Chemical Society, 2009, 131(17): 6050-6051.
[4] Kim H S, Lee C R, Im J H,et al. Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%[J]. Scientific Reports,2012, 2:591.
[5] National Renewable Energy Laboratoy. Best research-cell efficiencies[EB/OL].[2017-04-02]. https://www.nrel.gov/pv/assets/images/efficiency-chart.png.
[6] Grtzel M. The light and shade of perovskite solar cells[J]. Nature Materials, 2014,13(9):838-842.
[7] Mateker W R, McGehee M D. Progress in understanding degradation mechanisms and improving stability in organic photovoltaics[J]. Advanced Materials, 2017, 29(10):1603940.
[8] Ahn N, Kwak K, Jang M S,et al. Trapped charge-driven degradation of perovskite solar cells[J]. Nature Communications, 2016, 7: 13422.
[9] Park N G, Grtzel M, Miyasaka T,et al. Towards stable and commercially available perovskite solar cells[J].Nature Energy, 2016, 1: 16152.
[10] Yang Mengjin, Zhang Taiyang, Schulz P, et al. Facile fabrication of large-grain CH3NH3PbI3-xBrx films for high-efficiency solar cells via CH3NH3Br-selective Ostwald ripening[J]. Nature Communications, 2016, 7: 12305.
[11] Burschka J, Pellet N, Moon S J, et al. Sequential deposition as a route to high-performance perovskite-sensitized solar cells[J]. Nature, 2013, 499: 316-319.
[12] Liu Mingzhen, Johnston M B, SnaithH J.Efficient planar heterojunction perovskite solar cells by vapor deposition[J]. Nature,2013, 501(7467): 395-398.
[13] Fan Ping, Gu Di, Liang Guangxing, et al.High-performance perovskite CH3NH3PbI3 thin films for solar cells prepared by single-source physical vapour deposition[J]. Scientific Reports, 2016, 6: 29910.
[14] Chen Qi, Zhou Huanping, Fang Yihao,et al. The optoelectronic role of chlorine in CH3NH3PbI3(Cl)-based perovskite solar cells[J]. Nature Communications, 2015, 6: 7269.
[15] Im J H, Jang I H, Pellet N, et al. Growth of CH3NH3PbI3 cuboids with controlled size for high-efficiency perovskite solar cells[J]. Nature Nanotechnology, 2014,9:927-932.
[16] Wei Zhanhua, Chen Haining, Yan Keyou, et al.Inkjet printing and instant chemical transformation of a CH3NH3PbI3/nanocarbonelectrode and interface for planar perovskite solar cells[J]. Angewandte Chemie, 2014, 53(48): 13239-13243.
[17] Brenner T M, Rakita Y, Orr Y,et al. Conversion of single crystalline PbI2 to CH3NH3PbI3: structural relations and transformationdynamics[J].Chemistry of Materials,2016, 28(1): 6501-6510.
[18] Wang Kai, Shi Yantao, Li Bo, et al. Amorphous inorganic electron-selective layers for efficient perovskite solar cells: feasible strategy towards room-temperature fabrication[J]. Advanced Materials, 2016, 28(9):1891-1897.
[19] Venables J A, Spiller G D T, Hanbucken M,et al. Nucleation and growth of thin films[J]. Reports on Progress Physics, 1984, 47(4): 399-459.
[20] Mishchenko M I, Travis L D, Lacis A A. Scattering, absorption, and emission of light by small particles[M]. New York, USA: Cambridge University Press, 2002.
[21] Pazos-Outón L M, Szumilo M, Lamboll R.Photon recycling in lead iodide perovskite solar cells[J]. Science, 2016, 351(6280):1430-1434.


Last Update: 2017-09-11